# Best Wood for a Sauna: Ranking, Materials List & Drawings

> Compare five sauna wood choices, then calculate panels and bench boards for a 2 × 2 m interior with a materials list, three drawings and installation steps.

- Source: https://saunahelper.com/best-wood-for-sauna-materials-list/
- Publisher: SaunaHelper (https://saunahelper.com/)
- Last updated: 2026-10-16

> This page contains a free interactive tool. To use it, open https://saunahelper.com/best-wood-for-sauna-materials-list/ in a browser.

---

Short answer

Choose sauna wall panels and bench boards by their stated intended use, profile and finish—not species alone. **Clear aspen and alder bench stock** remain our editorial shortlist. **Thermally modified wood is not the same as preservative-treated timber.** Verify the exact product and surface before ordering; a wall-panel specification is not a bench specification.

![Illustrated colour swatches of five sauna woods: aspen, alder, thermo-aspen, cedar and spruce](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-cover-v2.png)

Picking a species is only half the job. You also need the right grade, profile and board length. Below you get a ranking, a picture of which wood goes where, and a worked materials list for a 2 × 2 m (6 ft 7 in × 6 ft 7 in) interior. Still choosing between a DIY build, a kit or a shed conversion? Start with our [comparison of the three building routes](https://saunahelper.com/outdoor-sauna-plans-diy-custom-kit-conversion-builds/).

## Which wood is best for a sauna? Our ranking

![Ranking card of five sauna woods: clear aspen, alder, thermo-aspen, western red cedar and sauna-grade spruce, with best use for each](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-04-five-woods.png)

| Rank / wood | Best for | Look |
| --- | --- | --- |
| **1. Clear aspen** | Benches, pale walls | Very pale, smooth |
| **2. Alder** | Benches, warmer walls | Honey to reddish |
| **3. Thermo-aspen** | Darker walls and benches | Coffee brown, more stable |
| **4. Western red cedar** | Aromatic interiors | Pink to red-brown |
| **5. Sauna-grade spruce** | Walls and ceiling | Pale yellow |

This is an editorial shortlist based on surface quality, looks and how easy the material is to specify. It is not a lab test or a strength ranking. Aspen, alder and their heat-treated versions are established sauna woods ( [Thermory species guide](https://thermoryusa.com/2025/12/10/best-wood-species-for-saunas/) ); cedar is known for its colour and aroma ( [Tylö material catalogue](https://tylo.com/hubfs/New%20folder%20structure%20%28Tyl%C3%B6%29%202022/Brochures/Sauna/English/tylo_sauna_2021_eng_web_20210517.pdf) ); spruce is sold as dedicated [sauna wall panelling](https://thermory.com/product/wall-panel-stp-spruce/).

**Our practical combination:** spruce or aspen panels on walls and ceiling, clear aspen for benches and backrests. Compare delivered prices for your actual cutting list. A cheap price per metre loses its edge when the available lengths create more waste.

### Also common in the US: hemlock and basswood

**Hemlock** is resin-free, low in odour and cheaper than cedar. It works for walls, ceiling and benches but lacks cedar's natural rot resistance ( [Bathing Brands](https://www.bathingbrands.com/blog-choosing-sauna-wood) ). **Basswood** is pale, almost odourless and very light, so it stays comfortable to sit on. Sauna-grade stock is harder to find, and it is not naturally rot-resistant either ( [Tahoe Sauna Company](https://tahoesaunacompany.com/best-wood-for-sauna) ).

![Pale aspen sauna interior with clear aspen benches, a slatted backrest and a small window (illustrative image)](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-aspen-interior.jpg)

*Pale aspen lining with clear aspen benches and backrest. Illustrative image.*

## Which wood goes where

![Schematic section of a backyard sauna marking four wood specifications: wall and ceiling lining, benches and backrest, hidden framing and exterior cladding](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-05-where-each-wood-goes.png)

- **Walls and ceiling:** kiln-dried sauna lining with a stated effective cover width and install method.
- **Benches and backrests:** smooth, clear bench boards. Choose thickness and supports together; wall panelling is not bench decking.
- **Hidden framing and bench supports:** the species, strength grade and fixings your building or bench design calls for.
- **Exterior cladding:** an outdoor product and coating system. It stays outside the hot room.

## Species, treatment and intended surface are different decisions

The word *treated* is too broad for a buying decision. [Thermory describes its thermal modification](https://thermoryusa.com/2025/12/10/best-wood-species-for-saunas/) as a heat-and-steam process without added chemicals. That is not the same process as adding wood preservatives. Still check the exact profile, finish and intended application.

Species names do not settle every surface question either. Thermory lists [coated thermo-aspen sauna wall panels and ThermoLam thermo-ash wall panels](https://thermory.com/smarts/). Those specific wall products do not approve ordinary paint, every ash board, arbitrary glues or their use on a bench. Ask for the product’s installation and care instructions, not a species-only assurance. See also our [guide to sauna finishes and manufacturer limits](https://saunahelper.com/can-you-paint-an-infrared-sauna/).

## Woods and materials to avoid

![Illustrated checklist of sauna material concerns, including construction stock, finishes, resin pockets and exposed fixings; read the product-specific qualifications in the caption](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-06-avoid-v2.png)

***Important qualification:** Read this as a screening checklist for unspecified stock, not a blanket ban on every ash wall panel or factory-finished sauna product. Wall panels and bench boards need separate specifications; the manufacturer examples above are product-specific exceptions, not general material approvals.*

Do not substitute unspecified construction timber, unknown reclaimed boards or generic painted sheet products for a product documented for the intended sauna surface. For bench contact surfaces, choose dedicated bench stock and inspect the finish, knots, resin pockets and fixings. A wall product is not automatically suitable for sitting on, and an exterior product is not automatically suitable indoors. No species or finish changes the heater’s clearance requirements.

## The example room

- **Interior:** 2,000 × 2,000 mm, 2,300 mm high (6 ft 7 in × 6 ft 7 in × 7 ft 7 in).
- **Door:** one centred 800 × 2,000 mm opening, no window. Each side of the door is 600 mm wide.
- **Lining:** vertical wall panels, ceiling boards across the 2 m span. Profile 15 × 90 mm with 80 mm effective cover (about ⅝ × 3½ in, 3⅛ in cover), 2.4 m stock (about 7 ft 10 in).
- **Benches:** 28 × 90 mm boards (about 1⅛ × 3½ in), cut to 1.8 m from 2.1 m stock.

Profiles and bundle sizes come from Thermory's [STP thermo-aspen panel](https://thermory.com/product/wall-panel-stp-thermo-aspen/) and [SHP aspen bench board](https://thermory.com/product/thermory-sauna-bench-board-shp-aspen/). The stock lengths are assumptions: confirm them with your supplier, and redo the takeoff for any other profile. Foundation, floor, roof, framing, insulation, heater and door are not included.

[![Dimensioned top view and front-wall elevation of a 2,000 by 2,000 by 2,300 mm sauna interior with an 800 by 2,000 mm door opening.](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-01-room-dimensions.png)](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-01-room-dimensions.png)

*Drawing 1: room dimensions used for the calculation. Tap to enlarge.*

## How much wood do the walls and ceiling need?

| Surface | Calculation | Net area |
| --- | --- | --- |
| Four walls | 8.00 m perimeter × 2.30 m | 18.40 m² |
| Door opening | − 0.80 m × 2.00 m | −1.60 m² |
| Ceiling | 2.00 m × 2.00 m | 4.00 m² |
| **Total lining** | Walls + ceiling − door | **20.80 m² (about 224 sq ft)** |

That is the finished area, not the order quantity. Overlap, cuts and spare boards still come on top. At 80 mm cover, each 2 m wall needs 25 boards and each 600 mm strip beside the door needs 8, with the edge board ripped to fit.

| Where the panels go | Pieces / length | Stock boards |
| --- | --- | --- |
| Three full walls | 3 × 25, up to 2,300 mm | 75 |
| Two strips beside the door | 2 × 8, up to 2,300 mm | 16 |
| Ceiling | 25, up to 2,000 mm | 25 |
| Above the door | 10, up to 300 mm | From ceiling offcuts |
| **Baseline** | Before spares | **116 × 2.4 m** |

A 2.4 m ceiling board cut to 2.0 m leaves enough for one 300 mm header piece, so keep those offcuts. Add a 10% reserve: 116 + 12 = **128 boards**. In six-board bundles that rounds up to 22 bundles, or **132 boards** (316.8 m, about 1,040 linear ft). Cutting losses are already in the schedule, so don't add a second blanket waste percentage.

[![Panel cutting diagram showing 91 wall boards and 25 ceiling boards cut from 2,400 mm stock, with ceiling offcuts reused for 10 door-header pieces.](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-02-panel-cut-list.png)](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-02-panel-cut-list.png)

*Drawing 2: count boards, then plan the cuts. Measure the built room before cutting.*

## How much wood do the benches need?

| Surface | Slats (90 mm) | Finished wood |
| --- | --- | --- |
| Upper deck | 6 slats + 5 gaps = 590 mm deep | 10.8 m |
| Lower deck | 4 slats + 3 gaps = 390 mm deep | 7.2 m |
| Backrest | 3 slats | 5.4 m |
| **Total** | 13 slats of 1.8 m | **23.4 m** |

Each 2.1 m board yields one 1.8 m slat. Thirteen slats plus two spares, rounded to four-board bundles, gives **16 boards** (33.6 m). The 10 mm gaps only illustrate the arithmetic; use the gaps your bench design specifies. A 1.8 m slat is not a 1.8 m unsupported span: heights, supports and fixings need their own design, and Harvia asks for [reinforcement behind the lining](https://support.harvia.com/hc/en-gb/articles/21953077934620-I-am-about-to-start-panelling-my-sauna-what-do-I-need-to-take-into-account) where benches and the heater attach.

[![Separate drawings of an upper deck with six slats, lower deck with four slats and a three-slat backrest, all 1,800 mm long.](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-03-bench-slat-list.png)](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-03-bench-slat-list.png)

*Drawing 3: bench and backrest surfaces only. The frame is not specified here.*

## Order list for this example

| Material | Example order | Note |
| --- | --- | --- |
| Wall and ceiling lining | 132 boards, 15 × 90 × 2,400 mm | 22 six-board bundles, cuts and reserve included |
| Bench and backrest stock | 16 boards, 28 × 90 × 2,100 mm | Four four-board bundles |
| Cover trims (optional) | about 22 m net | 9.2 m corners + 8 m ceiling edge + 4.8 m door; order each profile separately |
| Battens, reinforcement, bench frame | From your drawings | Spacing, loads and fixings per design |

Send your supplier the dimensions, profile code, effective cover, stock lengths, grade and cutting list in one go, and ask whether the price is per board, metre, bundle or square metre. That makes quotes comparable.

## What does sauna wood cost in the US?

![Bar chart of example US retail prices per square foot of wall for basswood, thermo-spruce, hemlock, aspen, alder, thermo-aspen and western red cedar sauna paneling, September 2026](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-09-us-prices.png)

A US 1×4 tongue-and-groove board covers about 3⅛ in, practically the same 80 mm as our example, so the board count carries over. The example order covers about 273 sq ft of wall and ceiling.

| Wood | Example listing | Per sq ft | Example room |
| --- | --- | --- | --- |
| Basswood | General-purpose T&G; sauna-grade stock is scarce ( [listing](https://thetongueandgroovestore.com/product/basswood/), [range](https://tahoesaunacompany.com/best-wood-for-sauna) ) | $3–7 | ≈ $820–1,910 |
| Thermo-spruce | 1×4 T&G, $2.50 per linear ft ( [Sauna Marketplace](https://saunamarketplace.com/product-category/sauna-materials/sauna-wood/) ) | ≈ $9.70 | ≈ $2,640 |
| Hemlock | Clear ½×4 T&G ( [Superior Saunas](https://superiorsaunas.com/pages/hemlock-lumber-paneling) ) | $9.99 | ≈ $2,730 |
| Aspen | 1×5 T&G ( [Superior Saunas](https://superiorsaunas.com/pages/aspen-paneling), [Sauna Marketplace](https://saunamarketplace.com/product-category/sauna-materials/sauna-wood/) ) | $12.95–14.20 | ≈ $3,530–3,870 |
| Alder | 1×4 T&G, $3.62 per linear ft ( [Sauna Marketplace](https://saunamarketplace.com/product-category/sauna-materials/sauna-wood/) ) | ≈ $14.00 | ≈ $3,820 |
| Thermo-aspen | 1×4 T&G, $3.82–4.52 per linear ft ( [bSaunas USA](https://bsaunasusa.com/product/1x4-thermo-aspen-sts4-sauna-wall-panels/), [Sauna Marketplace](https://saunamarketplace.com/product-category/sauna-materials/sauna-wood/thermo-aspen/) ) | ≈ $14.80–17.50 | ≈ $4,030–4,770 |
| Western red cedar | Clear ½×4 T&G ( [Cedarbrook](https://cedarbrooksauna.com/halfx4-clear-cedar-tongue-and-groove-paneling/), [Superior Saunas](https://superiorsaunas.com/pages/cedar-paneling) ) | $16.00–17.95 | ≈ $4,360–4,900 |

Single retail listings checked in September 2026, converted from per-linear-foot prices where needed. Shipping, tax, trims and bench stock come on top. Always ask for a delivered quote.

Free tool

What will your sauna build cost?

Enter your room size and get the heater size, a materials list and three price bands: DIY, kit and turnkey.

[Open the calculator](https://saunahelper.com/sauna-build-cost-calculator/)

## Installing the interior in eight steps

![Eight-step installation sequence for a sauna interior, from layout to finishing and drying](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-07-install-steps.png)

1. **Fix the layout.** Choose heater and door first, then set clearances, bench levels and vents from their manuals.
2. **Prepare the shell.** Foundation, roof and exterior for a new cabin; a sound, dry structure for a shed conversion; the parts list for a kit.
3. **Reinforce and route services.** Add fixing points for benches and heater before the walls close. Electrical work goes to a qualified installer.
4. **Insulate and seal.** Harvia's [example wall](https://pim.harvia.com/rockon-images/CIP/asset/download/3c5b6375-efcf-42bf-86ea-4ff1ab4796a9/306) uses mineral wool, sealed aluminium foil, a ventilation gap and panelling. It does not replace the exterior weather layers.
5. **Battens and lining.** Follow the panel system's batten spacing and gaps, start from a straight line and keep the ceiling offcuts.
6. **Build the benches.** Designed frame first, then clear slats with concealed or recessed fixings.
7. **Heater and checks.** Install and commission per the manual and local rules; check ventilation, clearances and bench supports.
8. **Finish and dry.** Harvia [recommends paraffin oil](https://support.harvia.com/hc/lt/articles/22158333579676-Maintaining-your-sauna) for benches and advises against lacquer. Air the room out after each session.

As an Amazon Associate we earn from qualifying purchases.

**[Sauna Shield Paraffin Oil for Sauna Wood (1 L or 5 L)](https://www.amazon.com/dp/B0CBHQ4GK2?tag=saunahelper01-20)**

Clear, odourless paraffin oil for benches and backrests. It soaks into the grain instead of forming a film, which fits Harvia's advice to oil benches and skip lacquer.

[Check price on Amazon](https://www.amazon.com/dp/B0CBHQ4GK2?tag=saunahelper01-20)

![Dark thermo-aspen sauna interior with warm LED lighting under the upper bench and a stone-filled heater (illustrative image)](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-thermo-aspen-interior.jpg)

*Thermo-aspen gives a darker, calmer room. Illustrative image.*

## Frequently asked questions

### Is thermally modified wood the same as pressure-treated timber?

No. Thermory describes its thermal modification as heat and steam without added chemicals. Check the manufacturing process and the exact product’s intended sauna use; the word “treated” alone does not establish suitability.

### Can I use ordinary pine or spruce from a builders' merchant?

Buy by specification, not species name: a dry, sauna-rated profile in the right grade. A spruce sauna wall panel is a different product from a random construction board. For seats, stick with clear aspen or alder bench stock.

### Is thermo-aspen better than untreated aspen?

It is darker and more dimensionally stable; plain aspen stays pale. Pick a sauna-rated product either way. Neither choice changes the structural supports you need.

### Can I use the same wood inside and outside?

Sometimes the same species, rarely the same product. Profile, grade and treatment differ, especially when the exterior board is coated or preservative-treated.

### How do I adapt the quantities to my room?

![Five-step method to calculate sauna lining boards: area, boards per section, cuts, reserve and bundle rounding, with the 2 by 2 metre example](https://saunahelper.com/wp-content/uploads/2026/09/sauna-wood-08-adapt-quantities.png)

Work through the five steps above for the lining, then count bench slats separately. For a quick first pass, the [build cost calculator](https://saunahelper.com/sauna-build-cost-calculator/) does the maths for you.

### What should I decide next?

Confirm your building route with the [DIY, kit and conversion guide](https://saunahelper.com/outdoor-sauna-plans-diy-custom-kit-conversion-builds/), then size the heater with our [sauna heater size calculator](https://saunahelper.com/sauna-heater-size-calculator/) and check the result against the manufacturer's rules, especially with glass walls.

*Editorial method: manufacturer specifications plus an original worked example; we did not test all five woods hands-on. Drawings and infographics are SaunaHelper planning illustrations, not engineered plans. Photos marked "illustrative image" are AI-generated. Specifications and US prices checked September 2026.*

*Material-use distinctions and manufacturer examples reviewed 16 October 2026. The worked quantities and September 2026 price examples have not been re-priced in this update.*

---

## Free SaunaHelper tools

- [Sauna Heater Size Calculator](https://saunahelper.com/sauna-heater-size-calculator/): which heater size (kW) fits your sauna room
- [Sauna Build Cost Calculator](https://saunahelper.com/sauna-build-cost-calculator/): DIY vs. kit vs. turnkey cost ranges, materials list and order of trades
- [Home Sauna Running Cost](https://saunahelper.com/how-much-does-home-sauna-cost-to-run-monthly-yearly/): what a home sauna costs to run per session, month and year
- [Which Sauna Is Right for You?](https://saunahelper.com/which-sauna-is-right-for-you/): 5-question picker: traditional, infrared, barrel, portable or blanket
- [Sauna Timer](https://saunahelper.com/how-to-track-time-in-the-sauna/): free session timer with heat, cool-down and rest rounds
- [Sauna Routine Builder](https://saunahelper.com/sauna-routine-builder/): a personal sauna plan in 30 seconds
- [Sauna Rituals](https://saunahelper.com/sauna-rituals/): guided audio sauna sessions
- [Sauna Soundscape](https://saunahelper.com/sauna-soundscape/): mix your own sauna sounds
- [SaunaHelper Connector for Claude](https://saunahelper.com/claude-connector/): use these calculators directly inside Claude and other AI assistants (MCP)

Canonical page: https://saunahelper.com/best-wood-for-sauna-materials-list/
